Replace Decking and Duadeck Covering
We have a very large deck, part covered part not with and irregular shape and three large stone pillars. The deck is only 7 years old but because the builder did not vent under the deck properly the plywood sheeting rotted out. Bob had his crew, Chris, John and Nathan remove the railings, which were sent out to be re-powder coated, strip all of the old plywood, replace 4 of the 2" x 12" stringers, box in under the pillars properly and tie them to the engineered beam and pilings, cut 8 - 21"x 8" vents and an access door, and then replace the covering with new Duradeck. They managed to do all of this work in 3 pretty long days.
I watched the work they did and it is a FAR superior install to the one I had done in Calgary by the Duradeck agent there 7 years ago. Bob' crew sanded all of the plywood, seams and screw lines, then used a filler compound to fill all of the seams and screw heads. They then did a great job of laying out the membrane and matching it to the three pillars as well as the whole length of the joint on the house.
They were quick, clean good at what they do and a pleasure to deal with.
- Approximate cost of services:
- $10,000.00
- What could this company do to improve their services?
- Any advice to offer fellow homeowners facing a similar project?