Trim and Moldings review in
Hamilton
Replaced pine column wraps that I previously fabricated and installed 20 years ago. Column height is 12 ft 6 inches. The stock 12 ft fluted wraps with supplied base and capital completed the column by simply raising the wrap on temporary blocking.
Assembly was relatively simple as I used a 10” wrap around a 6” post. This allowed sufficient room to plumb and align all four columns with the required blocking and shims.
I installed without assistance but would recommend an extra pair of hands at some point especially if installing such long wraps.
I am very satisfied with the finished product.
Staff at Elite are very helpful.
- Approximate cost of services:
- $2,000.00
Was this review helpful?